@well_cool - Looks like it to me
I got mine from my local Audi Dealer for £4.81. They had to to order it in, but was only a 2 day wait
@well_cool - Looks like it to me
The more I look at it the more I agree DaveHmmmm - S = Chrome. It goes way back for me, I guess I'm just a traditionalist
As I broke one of the retaining clips on the rear footwell lights, I thought, as I was putting a new light enclosure in, I may as well show the difference between the LED's
Top one (green) is the standard fit pathetic LED that Audi fit as part of their ILP for the A4/S4
Bottom one (white) is the full fat LED one that comes as part of Trups kit
Is the invitation transferable?On a different note, I've had an invite from my dealers to go and drive the full RS range on the 6th Aug at Ragley Hall. There's no track or decent roads there so not sure if I will bother, plus I soul need to take a day off and I'm self employed.....hmmm
Cool! Linky?
@jdp1962 - PM me for the site. Don't want to get 'em in troubleCool! Linky?
LolAs usual I'm jealous of your purchases Colin
CheersLooking good @Bristle Hound just need to update the picture in your sig now.
@Bristle Hound, hey Col, when you talk about removing the fog light surround, are you talking about the whole mesh section or just the trapezoidal bit directly around the lens? Either way, care to provide a "how-to" for a sausage-fingered ******?Finally got round to doing the fog light thing
http://www.audi-sport.net/xf/threads/a4-s4-b8-5-front-fog-light-delete.247806/
In the end I haven't removed the fog lights, I've wrapped the lenses in matt black wrap that I got off eBay. It was only £1.88 delivered & its decent quality stuff too
http://www.ebay.co.uk/itm/190969655428?_trksid=p2060353.m2749.l2649&var=490212885507&ssPageName=STRK:MEBIDX:IT
The fog light surrounds were easy enough to remove & then it was a case of cleaning the fog light lenses and wrapping them in the wrap
All in all about a 10 minute job to do both side's
I'm really pleased with the results and its looking like I'll keep it like this for the time being. If not its just a case of removing the fog light surrounds and peeling the wrap off
IMO just makes my S4 standout a little from all the other B8.5 A4's on the road
If no fogs are good enough for the RS4 then its good enough for me
@kev.s - Use the smaller edge of a piece of rigid plastic, about the size of a credit card. Make sure the mat you are going to do is clean then run the piece of plastic up & down the mat, going in the opposite direction for each stripe so to speakhow is that done, i don't own a lawnmower
Thanks BWVery nice!
Nope. They're all running scaredSeen any BMW's lately?
That's my Dawg!Thanks BW
Nope. They're all running scared
I have been tempted for a while to do the quattro badge thing after reading both
@GlynRS2 post on this
http://www.audi-sport.net/xf/threads/glynrs2s-sepang-blue-s5-sportback-blog.229107/#post-2295886
&
@warren_S5 post
http://www.audi-sport.net/xf/threads/warrens-s5-build-thread.218357/page-10#post-2297342
So after buying one I set about the task
Before -
The badge I got from eBay needed some minor 'modification's with a Dremel in order for it to fit
The quattro looks a little out of alignment in the pic below as I hadn't fully tightened the zip ties up
After -
The badge only lasted about 10 mins on the car as personally, the look it was giving me wasn't what I was after TBH
However, the look I have achieved with the front fog lights (or lack off as the case may be) is exactly what I'm after & grows on me the more I see it. I have washed the car since doing the front fogs and after a fair bit of extra jet washing, the wrap on the front fogs is fine
Thanks BWLooking Great!
Agreed JeffGlad you removed it, Col. It doesn't suit the S4's sleeper character.
Waste not want not.Thanks BW
Agreed Jeff
quattro decal now stuck on the side of 1 of my tool boxes