T
T-800
Guest
Thought I’d share this.
@DJAlix was kind enough to send me one of his Start Stop modules.
This works on the principle of keeping the current start stop button ‘state’ so if you have it pressed to off, it remembers that button state, no matter how many times the ignition is cycled on/off.
The beauty of Alex’s module though is
1) you don’t get the Inactive A symbol in the VC display
2) it can be re-enabled at any time by just simply pressing the SS dash button
3) it has a service mode so you can simply switch off the module (dealer visits etc)
Very simple install (3wires)
It can be either piggy back soldered in / or using scotchlocks / wire taps
The module itself is tiny (smaller than a stamp) so everything tucks back in with no issues.
@DJAlix was kind enough to send me one of his Start Stop modules.
This works on the principle of keeping the current start stop button ‘state’ so if you have it pressed to off, it remembers that button state, no matter how many times the ignition is cycled on/off.
The beauty of Alex’s module though is
1) you don’t get the Inactive A symbol in the VC display
2) it can be re-enabled at any time by just simply pressing the SS dash button
3) it has a service mode so you can simply switch off the module (dealer visits etc)
Very simple install (3wires)
It can be either piggy back soldered in / or using scotchlocks / wire taps
The module itself is tiny (smaller than a stamp) so everything tucks back in with no issues.