Farhan
Registered User
Hi All,
Im looking to carry out a small install on the 8V. My install plans are fairly simple, we are looking to add an aftermarket amplifier/Subwoofer to the base system.
I know what we intend to do with the install but i had a few simple questions:
For info, We arent looking to add/code/retrofit anything as we have the equipment already and would be removing the equipment into another car hence sticking to this method.
Im looking to carry out a small install on the 8V. My install plans are fairly simple, we are looking to add an aftermarket amplifier/Subwoofer to the base system.
I know what we intend to do with the install but i had a few simple questions:
- Where is the best location to tap the rear speaker wires? Is there anywhere in the boot area to quickly access these? (These will be fed into a processor to flatten the signal)
- We will need to run the amplifier power wiring from the battery, Is there a good known location to run the power wire from the firewall that other may know?
- We have signal sensing on the processor and the amplifier but is there a good known location to get a remote turn on in and around the boot area?
For info, We arent looking to add/code/retrofit anything as we have the equipment already and would be removing the equipment into another car hence sticking to this method.