Recent content by Robbyb

What do you mean by lower drop link? Sent from my iPhone using Tapatalk

When tried a different way I couldn’t get the arm low enough to get the u clamp on the shock on. The clamp was lower than the arm. Sent from my iPhone using Tapatalk

The slightly confused. So you mean undo the two control arms at the top? I’ve undone the bolt for the anti roll bar and the (front) rear control arm. When I lifted the front control arm with a jack it pushed the shock U clamp along the control arm to the ball joint. Sent from my iPhone using...

ANY HELP WELCOME!!! Hi all I’ve taken the front lower control arm off. I’ve gone to put the new front lower control arm on but the shock is to far down. I can’t push the shock up enough to get it to fit on the control arm. How do I get it in and the ball joint back in the hub????? Many...

*HELP* Audi A4 B7 2.0 bre tdi auto Could someone please help me. I’m trying to separate the brake booster/servo from the brake pedal. I believe there’s a special tool but I need the part number for the one I need as there’s so many different ones. Sent from my iPhone using Tapatalk

Did you find out what was wrong? Sent from my iPhone using Tapatalk

Found these on AUTODOC. Looks good. Sent from my iPhone using Tapatalk

I guess the best bet is to find out who actually makes the kit. Then you’d be able to find if it’s a good make. By the way the pinch bolt can be ridiculously hard to remove. Start with that so if you can’t get it off you can drive it to a mechanic. Also the parts should be tightened when it is...

In exactly the same boat as you. Looking but keep finding cheap Chinese ones. Sent from my iPhone using Tapatalk

So I had this exact same problem a while ago. I would take the fuel line off that comes from the actual pump then turn the ignition on so the pump primes and see if you get anything through. If yes I would def change the filter next. How long did you crank it for? Sent from my iPhone using...

Ok there like I said check fuel filter. I know they can be a real problem on these. I tried a jump box on mine and it couldn’t start it. They have to be powerful ones to start Diesel engines. Sent from my iPhone using Tapatalk

Could be air in the lines. Also definitely check the fuel filter. Sent from my iPhone using Tapatalk

Is there 12 volts coming through the pump connector? Sent from my iPhone using Tapatalk

Does anyone in Kent or Essex have a vcds? I would be will to pay for someone to increase my idle rpm. Sent from my iPhone using Tapatalk

Yes they are but like anything, seals degrade, I’d be having a look at that first. It would explain why it’s not doing anything. Are all the relays ok? Sent from my iPhone using Tapatalk