Search results for query: *

Hello, just of curiosity I checked fuses today If all are ok. (on driver side) Check all lines (A, B, C). All ok. (done this without contact) Then was time to go to work and is happens. Got "ACC and Audi Braking Guard: Unavailable" on cluster. Rear camera wont switch too when reversing...

Hello, so my original regulator slider for window on drivers side broke (window doesn't close). Took the door apart, replace the new sliders, assembled the window part of door without door panel, just so see if is working properly. Works fine, up and down no problem(buttons on door panel)...

Hello, we finished to measure our crankshaft today. Main journal are ok and we can use standard size. Min is 53.963 max 53.983 Main measurment #1-53.975 #2-53.970 #3-53.970 #4-53.970 #5-53.970 Conrod measurment #1-47.755 #2-47.755 #3-47.755 #4-47.755 Im in doubt about the conrod bearings...

Hello, i bought an agu engine for a project car. But I discovered that cylinder head is a bit damaged with one camshafts burgning on seats near chain tensioner like there were no oil. Valves are ok, pistons too. Can i swap other cylinder head with cams on agu block? I was thinking of ADR head...

Hello, i would like to buy some camber kit for my a3 8l. I was on a track and saw that just the edge of the tyre was eaten. What You guys think about that product? https://yt-motorsport.eu/shop/adjustable-top-mount-camber-plate-vw-golf-mk4/ Thanks, Cve4

Hello, im thinking to purchase Rear ARB, since my car doesnt have one (FWD with torsion beam). I found only Whiteline 160gbp or Neuspeed 340gbp. IS there any other ones? And why there are like gold prices :) Thanks, Best Regards!

Hello, in more or less 1 year I did turn my sleeper in a decent car. (Brake upgrades from fs3 to 288mm was done some years ago.) Swapped 1.8T AUM from MK4 to my car (A3-was 1.6). Rebuild head (gaskets, exhaust valves). New LUK clutch. Bought 3" decat and 2.5 catback. New fuelpump. And other...

Hey, I've done a remap and now I'm at 230hp(1.8T AUM), but still on stock SMIC. With summer/warmer air closing by maybe will have some problems. (I dont race, just some pulls rarely) I was thinking just to uprated SMIC: SMIC ALU Dont know about FMIC, what to keep my engine bay as stock as...

Hey, just wondering what to buy, I have two options NGK or Bosch. Any good reason to buy NGK over Bosch? thanks

Hey, here we go, new problems with winter coming :D Those problems (P0688, EPC light, no throttle) are happening, when is really cold outside like -5Celsius. But other days when is not that cold, car is working like a charm, no problems. This happens time to time. The car starts normal no...

Hey, so, what can I do/buy/upgrade, before chip, to get the maximum of it?(k03s AUM 150hp) I already have 3"downpipe/decat and, 2.5" catback. -injectors? I belive my stock are 310cc -smic? Would an aluminum smic be any good compered to original one? -2.0t coil pack conversion? Dont know about...

Hey, so, my cluster or something isn't reading the water temp exactly. Sometimes, when I just turn the engine on, in one-two minutes the water temp is at 90 or 120 Celsius on cluster, but the engine is cold (head, intake, rad hoses,...) Before turning the engine on, or when is start, the...

Hey, Can I fit S3 cluster into A3 car? As far as I know I've just 2 connectors for cluster(blue-green). Does s3 have 3 with grey one? thanks

Hey, what type or which boost gauge is good for the money? Ofc not cheap and not expensive, anything in middle price? thanks!

Hey, I've no idea where to plug this cable, really can't find anything? VAG-COM, is saying something about "secondary air pump", but SAI is connected and power steering cable too(both are sharing same cable like (Y-cable)). Can anyone take a look, or even take a photo, very appreciated...

hey, which exhaust system would be good for 1.8t aum (k03s). Don't want to spend much neither to buy one cheap. 2.5" or 3"? After exhaust I'm going to do chip/stage 1, so around 200+ hp, right? thanks

Hi there, how hard is to swap (1.8T) agu engine into (1.6) avu engine car? Already updated the breaks to 288mm. Things I know that I will need. -engine, gearbox, all pipes, alternator, starter, coils, injectors -ecu (I have MS2) -turbo (have already) What about looms, key, key-lock, pumps...

Hello there, I was wondering I if could improve or even ugrade my rear axle. As far as I know I have beam(rigid) axle (semi-independent axle). Is possibile to upgrade to "independent axle" ? In picture: http://i.imgur.com/mEkwQ6j.jpg thanks cvetko