323mm EBC Ultimax discs And Ferodo DS2500,S

s3dave

TFSI Hybrid
Supporter
Joined
Nov 11, 2009
Messages
10,099
Reaction score
739
Points
38
Location
west yorks
Website
www.stainless-engineering.co.uk
Recieved today and will be fitting tonight so i can get the biAtch through the MOT...
Looks like a really decent set up and cant wait to get them on...:eyebrows:
A quick thanks to Bill (badger5)for the fast turnaround and great service!:cool:
11102010274.jpg

By d121m at 2010-10-11
11102010273.jpg

By d121m at 2010-10-11
 
Got the same to go on mine this weekend only 312mm though no big stoppers here lol :p Bloomin MOT!
 
Got the same in my setup. They are VERY effective. So effective I managed to boil the Motul RBF600 brake fluid. I'll be honest. I didn't expect that. I've now taken the plunge and dropped in some Castrol SRF. We'll see how that performs at the next track day :)
 
Fitted today with a nice MOT certificate....
12102010274.jpg

12102010277.jpg

12102010276.jpg

Word of warning, they really grab until the paint comes off the friction area ...just need a few hundred mile on them now, and then they are sorted.They feel very smooth and a lot less noise then the drilled ones...
 
exactly the same setup as me also from bill, just be aware there is heavy smoke if you hammer the brakes whilst the are still any signs of paint on them, it takes a while for that stuff to come off completly,
 
Got the same in my setup. They are VERY effective. So effective I managed to boil the Motul RBF600 brake fluid. I'll be honest. I didn't expect that. I've now taken the plunge and dropped in some Castrol SRF. We'll see how that performs at the next track day :)

rbf660 is what i use and stock these days.. slightly higher temp than 600..
SRF is so so expensive and boil temps not any higher

add ducting or go 2 piece if yo overheat them that badly.. you animal you ! :p
 

Similar threads

Replies
1
Views
709
Replies
2
Views
1K
Replies
8
Views
2K
Replies
11
Views
2K