Hi everyone!
My first post on this forum. I have been reading this forum for a while and it's amazing. I have found a lot of information for doing several retrofits and other stuff. Thanks for that. But now I have a problem.
I was doing ch/lh -lights and footwell lights retrofit (thanks to RobinA3 for looms and lights) and when I had all installed it was vag com time. But I had a problem with vag com coding. My central electric byte 0 looks like in the picture below.
As you can see there is only those two options. No options for footwell lights or ch/lh-lights. After doing some research on this forum I found a thread where was different central electric modules listed. I copied the list below.
8P0-907-279: 17 byte (base)
8P0-907-279-A: 17 Byte (Highend)
8P0-907-279-B: 21 bytes (base)
8P0-907-279-C: 21 Byte (Highend)
8P0-907-279-D: 17 Byte (Highend)
8P0-907-279-E: 23 byte (base)
8P0-907-279-F: 23 Byte (Highend)
8P0-907-279-H: 24 Byte (Highend)
8P0-907-279-J: 30 bytes (base)
8P0-907-279-K: 30 Byte (Highend)
8P0-907-279-L: 30 Byte (Highend)
8P0-907-279-M: 30 bytes (base)
8P0-907-279-N: 30 Byte (Highend)
8P0-907-279-P: 30 Byte (Highend)
8P0-907-279-Q: 30 Byte (Highend)
So according to this list my car has 30 bytes base central electric module. Does that mean that it doesnt support footwell or ch/lh lights? If so can I get them working by changing the module to 8P0-907-279-K or L or N or P or Q 30 Byte (Highend). And is there any differences between those 30byte highend modules with different last letter? What about changing the module. Is it hard?
Thanks for your help!
My first post on this forum. I have been reading this forum for a while and it's amazing. I have found a lot of information for doing several retrofits and other stuff. Thanks for that. But now I have a problem.
I was doing ch/lh -lights and footwell lights retrofit (thanks to RobinA3 for looms and lights) and when I had all installed it was vag com time. But I had a problem with vag com coding. My central electric byte 0 looks like in the picture below.
As you can see there is only those two options. No options for footwell lights or ch/lh-lights. After doing some research on this forum I found a thread where was different central electric modules listed. I copied the list below.
8P0-907-279: 17 byte (base)
8P0-907-279-A: 17 Byte (Highend)
8P0-907-279-B: 21 bytes (base)
8P0-907-279-C: 21 Byte (Highend)
8P0-907-279-D: 17 Byte (Highend)
8P0-907-279-E: 23 byte (base)
8P0-907-279-F: 23 Byte (Highend)
8P0-907-279-H: 24 Byte (Highend)
8P0-907-279-J: 30 bytes (base)
8P0-907-279-K: 30 Byte (Highend)
8P0-907-279-L: 30 Byte (Highend)
8P0-907-279-M: 30 bytes (base)
8P0-907-279-N: 30 Byte (Highend)
8P0-907-279-P: 30 Byte (Highend)
8P0-907-279-Q: 30 Byte (Highend)
So according to this list my car has 30 bytes base central electric module. Does that mean that it doesnt support footwell or ch/lh lights? If so can I get them working by changing the module to 8P0-907-279-K or L or N or P or Q 30 Byte (Highend). And is there any differences between those 30byte highend modules with different last letter? What about changing the module. Is it hard?
Thanks for your help!