Basically my hub has stripped 3 of its threads. Not sure if they can be tapped but a new hub and bearing is going to cost me 80quid on trade. Seeing as the uprights are such a pain in the **** to get off due to siezed bolts and so on im not sure if i`ll be able to do it on the drive and with the tools i have.
If i can get it off i can get the new hub/bearing pressed in for nothing but if i cant get the upright off then A, i dont want to drive it with 2 bolts in the wheel and B, even at staff rate i cant really afford the labour as even in the workshop its a pain to take it all apart.
Ones on ebay arent suitable as far as i can see so im asking on here if anyone has one laying around. If it has a bearing in it or not doesnt matter. If it does and its in decent nick then better as i dont have to pay 80quid for new bits.
Needs to be the left hand side, 75mm upright fitted to the following engine codes: AFN, AHL,AHU,ADR,AEB,AFY,AFF,AHH
Need one fairly desperately
If i can get it off i can get the new hub/bearing pressed in for nothing but if i cant get the upright off then A, i dont want to drive it with 2 bolts in the wheel and B, even at staff rate i cant really afford the labour as even in the workshop its a pain to take it all apart.
Ones on ebay arent suitable as far as i can see so im asking on here if anyone has one laying around. If it has a bearing in it or not doesnt matter. If it does and its in decent nick then better as i dont have to pay 80quid for new bits.
Needs to be the left hand side, 75mm upright fitted to the following engine codes: AFN, AHL,AHU,ADR,AEB,AFY,AFF,AHH
Need one fairly desperately