Changing front ARB Bushes

[doublem_1]

Noticed today whilst fitting my 312mm discs that the front ARB's look like they need replacing. Theres a big gap between the bar and the bush.

It looks easy to replace. Just one nut by the looks of it. Is this correct?

 

[jay1601]

bit of a pain as theres not much hand room down there. but pretty easy. just make sure you get the correct size bush

 

[SiGainey]

If you struggle to get the collar over the new bush, use some mole grips / water pump pliers to close the gap a bit more. Or you could get a slightly longer bolt and use that to close the gap before putting the proper bolt back in...

 

[doublem_1]

Excellent. Thanks guys.

 

[chippie]

If you are only changing the bush's just make sure that the plastic lug / spacer isn't split or brocken as you will then need a new bar.