Ive seen a votex front splitter for sale on a 3 dr so I need to know if it will fit my sportback please? Also, how do they attach?
Votex front bumper spoiler fitment
- Thread starter Leon tfsi
- Start date
Hi mate, it should do, just make sure it is the one for the single grille front and not twin grille as I think they are slightly different.
If you can get the part number then I can confirm this to you mate as I have all the part numbers from when I done my conversion.
If you can get the part number then I can confirm this to you mate as I have all the part numbers from when I done my conversion.
Ok cheers. I'll ask him to have a look. Where will the part number be? And can you see it if it's still attached to his car?
MTRL
Split Grill!
- Joined
- Nov 17, 2011
- Messages
- 450
- Reaction score
- 53
- Points
- 28
Easy to fit.
1) Unscrew all the screws underneath the front bumper.
2) Clean all areas where glue is to be applied
3) Apply glue to splitter around the sides, underneath and a bit on the front. I used black stickaflex
4) Tape to body to hold it in place.
5) Replace the screws with the longer screws provided & the plastic offset piece for the centre.
6) Check its all in the correct position and the tape is nice and tight.
7) Leave for 24 hours
8) Post photo
Keep some white spirits and a clean rag close to hand to wipe off any excess glue quickly.
1) Unscrew all the screws underneath the front bumper.
2) Clean all areas where glue is to be applied
3) Apply glue to splitter around the sides, underneath and a bit on the front. I used black stickaflex
4) Tape to body to hold it in place.
5) Replace the screws with the longer screws provided & the plastic offset piece for the centre.
6) Check its all in the correct position and the tape is nice and tight.
7) Leave for 24 hours
8) Post photo
Keep some white spirits and a clean rag close to hand to wipe off any excess glue quickly.
I think the part number should be underneath mate.
Have you got a picture of the car it is already fit onto?
Have you got a picture of the car it is already fit onto?
