Audi S3 freak
Registered User
Hi all, right quick question for you Lot. Just got a relentless manifold so wanted to know if you lot wrap these or not as I don't want to wrap it if they are prone to cracking! Cheers
Cheers tuffty! Do you or bill have any pics off the heat shielding? Also how much would you ad bill charge to map my car? Mods are manifold 3inch dp and de cat, miltek cat back, stage 3 hybrid, sfs tip and jetex filter, 007p, n249 bypass amd stage 2 map and soon a front mount. (what do the standard smic become maxed out at?) .
Does anyone know what length of wrap would be needed?
I'm guessing it's best to wrap the manifold and downpipe to protect all engine bay parts?
liquid, is it poss to get one of those off you?Thats why i made up a titanium heat sheild for mine,keeps heat away from
turbo elbo,wireing ect,without the bad points of wraping stuff,id make a better sheild than the oem one.
I knew you was going to say that! That means so far this month I have had to buy a brand new k04 (last one was scrap) and have it made hybrid, manifold, new wheels (need to buy tyres and adapters) and also a fmic (might go with ah fabs or pro alloy?). This is starting to hurt my bank.....just hope it's worth it!I have let Bill know about your post... change the SMIC's for a decent front mount before mapping... they are useless on a stage 1 let alone a hybrid... FMIC in the stickies...
No pics of any specific shielding but check out this thread of a BT TT we did a little while ago..
http://www.audi-sport.net/vb/tt-tt-s-tt-rs-forum/148453-build-thread-pic-heavy.html
Pics further down the thread shows where the shielding goes further up the bulkhead/scuttle...
<tuffty/>
Bill how much would this set me back? I'm sure every time I come on this site it costs me more money! Lol also how much to map my car spec above, cheersa little bewt i did a few years ago.. zircotec ceramic coated
My freind made one for me,works a treat,he works for airbus,so i posted up on asn for interest,no one seemed interested so we did'nt produce any more,another member on asn just bought the template sorry,if there was enough interest we could re make them,but to make one would'nt be worth are while,and the titanium is'nt cheep,if you get some other interest mayby be worth it.liquid, is it poss to get one of those off you?
will pm you budMy freind made one for me,works a treat,he works for airbus,so i posted up on asn for interest,no one seemed interested so we did'nt produce any more,another member on asn just bought the template sorry,if there was enough interest we could re make them,but to make one would'nt be worth are while,and the titanium is'nt cheep,if you get some other interest mayby be worth it.
Sam what spec is the rentless turbo? Any clues yet to expected bhp...
Anyone in the North West can go to Camcoat in Warrington
I had my Ducati exhaust ceramic coated satin black inside & out . A lot of the other lads have the cerachrome finish so the dont need to keep polishing them
They also coat pistons & alsorts
Performance coatings supplied and applied: ceramic thermal insulation, lubrication, heat loss and anti-corrosion.
Sam,
Cast 2283 should be good sounds similar to one of the Porsche wheels. Going to say I think a clipped stock k04 will be your down fall! Absolutely no point in clipping a stock turbine!
My freind made one for me,works a treat,he works for airbus,so i posted up on asn for interest,no one seemed interested so we did'nt produce any more,another member on asn just bought the template sorry,if there was enough interest we could re make them,but to make one would'nt be worth are while,and the titanium is'nt cheep,if you get some other interest mayby be worth it.
Glad you received it ok,i am going to make up another batch of these within a week two weeks now anyway,ready bent to shape,i was'nt going to bother,but with the increased amount of xs manifolds being sold,there is a market for these now,so within a week or so,i will post up a thread on these sheilds with pics ect.thanks adam.I have the prototype/template. LiquidS3's mate has told me he is happy for me to reproduce it. I don't have the facilities or time to fab these up but if anyone needs a template made from the prototype just drop me a pm.
Glad you received it ok,i am going to make up another batch of these within a week two weeks now anyway,ready bent to shape,i was'nt going to bother,but with the increased amount of xs manifolds being sold,there is a market for these now,so within a week or so,i will post up a thread on these sheilds with pics ect.thanks adam.
Thanks mate,i will make you one up.adam i want one, yours looks good