ERROR CODES HELP!

[magic123]

background - my battery died basically and had to replace so it reset some of the ECU (i believe)

just over a week later my EM light comes on with these 2 error codes -

P3137 (IMRC) basic setting not carried out
P3139 Intake manifold runner control deviation

the light was on and then turned itself off, just worried, could someone please help me with what these mean or what i should do? thanks

 

[AudiMafia]

[h=2]19593/P3137/012599 - Intake Manifold Runner Control: Basic Setting not Completed[/h][h=4]Possible Causes[/h]

• Intake Manifold Runner Control Basic Setting not performed

[h=4]Possible Solutions[/h]

• Perform Intake Manifold Runner Control Basic Setting

[h=4]Special Notes[/h]

• When found in Engine: 2.0l TFSI
  • Perform Basic Setting.
  • Check TPL 2016420 (RoW)
    • Check Engine Control Module Software Version, if necessary perform Update.
    • Replace Intake Manifold Runner (V157) with updated part.
  • Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
    • Check Engine Control Module Software Version, if necessary perform Update.
    • Replace Intake Manifold Runner (V157) with updated part.
    • Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.

 

[AudiMafia]

[h=2]19594/P3138/012600 - Intake Manifold Runner Control: Regulation Deviation[/h][h=4]Possible Causes[/h]

• Intake Manifold Runner Control Basic Setting not performed
• Wiring from/to Intake Manifold Runner Control faulty
• Intake Manifold Runner Control faulty

[h=4]Possible Solutions[/h]

• Perform Intake Manifold Runner Control Basic Setting
• Check/Repair Wiring from/to Intake Manifold Runner Control
• Check/Replace Intake Manifold Runner Control

[h=4]Special Notes[/h]

• When found in Engine: 2.0l TFSI, perform Basic Setting.
  • Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
    • Check Engine Control Module Software Version, if necessary perform Update.
    • Replace Intake Manifold Runner (V157) with updated part.
    • Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.
• When found on Direct Injection engines, such as the 2.0l TFSI, in combination with system too lean or similar faults indicating a vacuum leak diagnose them because "Regulation Deviation " may be the result of a vacuum leak.

 

[AudiMafia]

You would need VCDS specific for the basic settings. Check forum faqs and see who has VCDS on your area.

You need the basic settings done to get rid of the fault codes