- Joined
- Mar 28, 2010
- Messages
- 10,073
- Reaction score
- 2,689
- Points
- 113
- Location
- Liverpool/Southport. N west
Today I didn't do the compression test - got only 3 of the 4 plugs undone (cylinder 1 was extremely tight - it's always been a hot cylinder where I have had issue's with a misfire on multiple occasions and cylinder 2 - I couldn't get the plug undone using the same tools which undid 3 and 4 easily. rather than struggling and breaking it somehow.. I put it back together again and went to the park with the grandkids to make a snowman.
has anyone ever sprayed something down to help undo the plug - I think it is the grease boiling and bonding the plug - they only went in 6 months ago.
In my head - I think cylinder 1 and cylinder 2 are a problem between each other. This is the head damage I ignored when I change the head gasket.
If you look at the head you can see where the ceramic part of a spark plug (in my avatar) had broken off in cylinder 1, but there is also damage in cylinder 2 which means that some how it travelled in-between cylinder 1 and 2 through the exhaust valves?
View attachment 143606
You put it back together like that?!?
Jeeeesus
Sent from my iPhone using Tapatalk