Having a little play with vcds and for some reason weather I clicked something without knowing my gauge went from 1/2 to just under 3/4 after some reading I've managed to get it back down to where it was but if possible I would like somebody to check the values in the adaptation and tell me what there standard settings are.
So it would be
Instruments - 17
Adaptation 10
I'd need channel 30 and 33 reading and if mine are correct one should be 118 and the other 128 can't remember which way round without hooking it back up.
Would really appreciate it.
So it would be
Instruments - 17
Adaptation 10
I'd need channel 30 and 33 reading and if mine are correct one should be 118 and the other 128 can't remember which way round without hooking it back up.
Would really appreciate it.