Audi Drive Select (ADS) - VCDS

[NethanB]

I have an Audi A4 2011 2.0 TDIe - B8/8K i think

I was wondering if my car was compatible with Audi Drive Select as I have the VCDS now and wouldn't mind enabling it/coding it in if possible

Just don't want to waste my time doing all the work if its not going to work...

Thanks

 

[Point_Audi]

Yea you should be able to ok, but you will need to change the mode by VCDS all the time unless you install the ADS switch!

 

[Tay]

If you've got MMI you should be able to enable it to allow you to change the settings for Engine/Gearbox and Steering through the MMI, without the ADS switch.

 

[lemonslap]

I have in enabled through my MMI only, however the different settings don't seem to make any difference? Also you will get a soft (no warning light on dash) fault code due to the switch not being present.

 

[desertstorm]

On a 2011 car you should be able to enable it on the MMI and be able to change the settings without installing a switch.
It makes a good deal of sifference to my car between comfort and Dynamic really increases the throttle response and stiffens up the steering.
http://www.audienthusiasts.com/project_ads.html

Karl.