What wheels would look good?

[BigCat]

Hi guys..found a set of 19inch 8.5J et48 7 spoke blade of a 2010 A6 ...will these fit my b6 & how would they sit with that offset??

 

[Andrew@A.L.D]

The offset should be fine that's if your running 235 as mine are 29et with 235 and I would say that's the max I would go as it does scrap the inner arch a bit some times.

 

[BigCat]

Thanks Andrew...i'm running 235 45 17 at the minute...suppose i need to go 35 on 19? Seller looking 300quid rims only but they are oem....wat u think

 

[mattyboyc]

With an ET of 48, I think you would want spacers, I personally don't like spacers so would be looking at a ET of 43 or lower.
Some members have fitted A5 wheels with spigot rings and they have a ET of around 28 and fill the arches well.

 

[BigCat]

Thanks mattyboyc...i want my wheels sitting more or less flush with arches so will hold of this set.....can i still go 19 inch on an a5 wheel et 28 or will it have to be 18inch...

 

[mattyboyc]

19's are not for me as I use the car for what it is, an estate car , but I would guess you would be ok with 35 profile tyres but you'll need some input from someone who likes that look.

 

[Andrew@A.L.D]

ET29 with rings to get the right fit. Hard to tell but the wheel stick out a bit and did scrap on the inner arch.

 

[Greeny233]

I ran 8.5x19 et32 with 225/35-19 and they filled the arches nicely and didn't catch. I also think they would fit ok with 235/35-19 tyres as well, which would be the correct size. I was only running 225 to get my old 3SDM wheels (which were wider) to clear.

 

[neil ratcliffe]

got these on mine

 

[BigCat]

I ran 8.5x19 et32 with 225/35-19 and they filled the arches nicely and didn't catch. I also think they would fit ok with 235/35-19 tyres as well, which would be the correct size. I was only running 225 to get my old 3SDM wheels (which were wider) to clear.

I ran 8.5x19 et32 with 225/35-19 and they filled the arches nicely and didn't catch. I also think they would fit ok with 235/35-19 tyres as well, which would be the correct size. I was only running 225 to get my old 3SDM wheels (which were wider) to

I ran 8.5x19 et32 with 225/35-19 and they filled the arches nicely and didn't catch. I also think they would fit ok with 235/35-19 tyres as well, which would be the correct size. I was only running 225 to get my old 3SDM wheels (which were wider) to clear.

I ran 8.5x19 et32 with 225/35-19 and they filled the arches nicely and didn't catch. I also think they would fit ok with 235/35-19 tyres as well, which would be the correct size. I was only running 225 to get my old 3SDM wheels (which were wider) to clear.

Those RS4's look spot on...they are et32 then..

 

[Greeny233]

Yes et32 8.5x19

 

[A4CabJock]

5 spoke 45/240/r18
Just had them stripped and sprayed.
Had RS4 17s before but they look good only on an RS4 imo