Zac
Registered User
- Joined
- Sep 20, 2014
- Messages
- 61
- Reaction score
- 7
- Points
- 8
So I finally got around to fitting my MFSW. It all works fine (buttons aren't quite right but I have an Android HU so can rectify that), recalibrated the steering angle sensor etc so have no errors on the dash board. My only problem is that I've now lost my cruise control. I Think that my issue is that I have a control module 1K0 953 549 CH after reading this page on RossTech:
http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions
However, upon reading it seems that this is actually designed for the Golf Mk5. When trying to code in VCDS, my options have now changed slightly (see attached pic); the only option is for a 6 button stalk, and mine only has 5 I think (set, up, down, memory, off). I assume this is where the A3 and Golf differ?
Is there anything I can modify/code or do I need to bite the bullet and buy a new control module, eg 8P0 953 549 F?
Car is a 53 plate 3 door with cruise control, lowline module as standard.
Thanks for any help
http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions
However, upon reading it seems that this is actually designed for the Golf Mk5. When trying to code in VCDS, my options have now changed slightly (see attached pic); the only option is for a 6 button stalk, and mine only has 5 I think (set, up, down, memory, off). I assume this is where the A3 and Golf differ?
Is there anything I can modify/code or do I need to bite the bullet and buy a new control module, eg 8P0 953 549 F?
Car is a 53 plate 3 door with cruise control, lowline module as standard.
Thanks for any help
