Hi guys & girls
I posted a while back basically asking what car to get next. However I got offered a cracking deal on a 2004 Astra H Design. Not what I'd choose but. 1 owner (family friend) 100k miles, 1.6 petrol... £600 and dropped to my door!
SO.... now my daily is sorted I want to start a project car, would like a Stroker 2.0L GT3076R. I work in a garage so tools aren't a problem. I will also be learning to weld
This is a massive jump in the deep end for me but I like a challenge and I learn fast, the bit I'm struggling with is knowing what parts to buy. I want to collect everything before I start. So far this is my list.
Turbo GT3076r (twin scroll?)
2.0 FSI Crank
83mm Pistons
144x20 Rods
AEB Head
Intake Vavles
Exhaust Vavles
Valve Guides
Valve Springs/retainers
Valve Stem Seal
Head Bolts
Head Studs (do I need both?)
Camshaft Gear
Fuel Rail
Uprated Fuel Pump
Injectors
Gaskets etc
2.0t Coil Pack
Clutch Kit
Pulley's
Catch Can
Intake Manifold
Hemi 80mm TB
Uprated MAF
Manuel timing belt kit
Short Shifter
Intercooler
Exhaust Manifold
Custom Exhaust
Oil gear 1.8 to 2.0
Wastegate?
Any advice and tips etc would be greatly appricated!! WI'll be collecting parts for the next year ish so I've got some time (while I'm on a 47 week mechanics course).
I posted a while back basically asking what car to get next. However I got offered a cracking deal on a 2004 Astra H Design. Not what I'd choose but. 1 owner (family friend) 100k miles, 1.6 petrol... £600 and dropped to my door!
SO.... now my daily is sorted I want to start a project car, would like a Stroker 2.0L GT3076R. I work in a garage so tools aren't a problem. I will also be learning to weld
This is a massive jump in the deep end for me but I like a challenge and I learn fast, the bit I'm struggling with is knowing what parts to buy. I want to collect everything before I start. So far this is my list.
Turbo GT3076r (twin scroll?)
2.0 FSI Crank
83mm Pistons
144x20 Rods
AEB Head
Intake Vavles
Exhaust Vavles
Valve Guides
Valve Springs/retainers
Valve Stem Seal
Head Bolts
Head Studs (do I need both?)
Camshaft Gear
Fuel Rail
Uprated Fuel Pump
Injectors
Gaskets etc
2.0t Coil Pack
Clutch Kit
Pulley's
Catch Can
Intake Manifold
Hemi 80mm TB
Uprated MAF
Manuel timing belt kit
Short Shifter
Intercooler
Exhaust Manifold
Custom Exhaust
Oil gear 1.8 to 2.0
Wastegate?
Any advice and tips etc would be greatly appricated!! WI'll be collecting parts for the next year ish so I've got some time (while I'm on a 47 week mechanics course).