Need help before buying wheels

[VladRKO]

Hi everyone , I have searched around the forum but no luck to find an answer for my dilema
I want to buy some RS6 9.5x20 et 36 for my 2005 B7 2.0 tfsi avant and i didn't find any info about if they fit without rubbing or anything else
Anyone had those specs on their B7 ? Thank you

 

[Deleted member 85022]

Is your car lowered at all? What size tyres are the wheels running?

 

[VladRKO]

Yeah I run Bilstein B8 + HR springs , wheels have 245.40.20 tyres but I assume i'll need 235.35.20 . What I'm worried about is that the wheels will poke to much , i don't want to hit the fenders

 

[Deleted member 85022]

I ran 19s 9.5 et45 with 235 35 tyres stretched with no issues. So you'll end up probably wanting 30 profile tyres. Normally et35 isn't going to stick out too much. And with a stretchedtyre I doubt there would be contact.
http://www.willtheyfit.com/index.ph...2=30&wheel_size=20&wheel_width=9-5&offset2=36

If you click that it should show you the difference between a 8.5j 19" wheel compared to the 20" you have said.you can change all the measurements so you should get a good idea of what it will look like on the car.

 

[dimitar.tuntov.5]

Et 36 is not a lot so i think will be OK ! I.m runnin et35 with coilovers and i'm fine but yes i run 19''

 

[VladRKO]

Ok guys , thanks for your help , i'll buy those wheels , they need refurb first and nee tyres . what size should I go? 235.35 or 235.30 ?

I also was thinking that 9.5 is a bit to much , especially for the front end , how do you guys feel the car with 9.5?


Here is a pic with the wheels