Looking good mate, how did you decide on the values of the resistors to use? Trial and error? Or are they equivalent wattage and resistance to the original lamps?
No dis error only. Working on no flash solution. Will post backSo with these resistors no fault and led dosent flash ???
Sent from my SM-G950F using Tapatalk
Did you noticed if this cover limits the signal ? Do you need to be closer to the car to open doors ?Could not stand it and not given up on key fob mod.
As vinyl was going in between rubber buttons and plastic fob body, it was causing automatic all windows opening whenever pressed open button on the fob.
Button was getting stuck and it was looking silly to open all windows with outsides weather.
So vinyl wen off.
Ordered one of these
As it was randomly posted colour by the seller and it would’ve been painted over, I didn’t mind what will turn up.
Actually, asked politely for a red one to see if It looked nice. Don’t have much red in or outside the car but it could still work.
White turned up.
Filled out the logo cutout, as it was misaligned and painted in Metallic Silver.
Also, painted matt black keyring silver bit in the fob so the colours are inverted.
Funny thing with that because I used my wife’s nail polish. Well, I ordered the nail polish for this purpose but will leave it for her.
Already transformed key appearance
Now the shell
On the key
In the warm lighting it looks like champagne colour but in day light, looks much nicer.
It is the same tin of paint as the first key attempt.
Just popped it all on so will follow up day light pictures.
Sent from my iPhone using Tapatalk
I wrapped mine. 2 years ago . Now ill be doing same but in black carbon
Sent from my SM-G950F using Tapatalk
Did you noticed if this cover limits the signal ? Do you need to be closer to the car to open doors ?
Sent from my SM-G950F using Tapatalk
do you know hot mo remove rev limiter on a6?
That lemans badge is in an odd place... usualy its 2x under side indicatiorsAfter 2 months without a wash, went yesterday to car a wash. Hardly can do much around the car, as back does not allow me but still able to do few things.
Those tailgate rear lamps faded with time and looked odd every time, after wash and until waxed.
From that
To that
Also, some 2.0 TDI badge left out some glue on the tailgate so from this
Got to this
All thanx to meguiars ultimate polish.
Managed to got rid off and flatten down few stubborn bird droppings on the roof.
As it was nearly midnight, I was knackered to even take a picture if the whole car polished and buffed after washing.
These
Show how deeply embedded dirt can be on your car. Even after a wash.
Next time will have to clay the car, as I can feel under the cloths, it is still like sand paper.
All cloths washed but going to be used only for wheels as hasn’t brightened much.
New microfibre cloths on order
Sent from my iPhone using Tapatalk
I did this
Sent from my SM-G950F using Tapatalk
Yes console out. Carbon wrapYou meant carbon? Looks nice. Did you took the whole console out or did it fitted?
Now the rest of alu trims.
Sent from my iPhone using Tapatalk
Have you done it yourself of someone else did it for you?Yes console out. Carbon wrap
Sent from my SM-G950F using Tapatalk
Myself. As my tunel was scuffed and schrached i did this and it looks great ! . It took me 4h , used my wifes hairdryer as i dont have a heat gunHave you done it yourself of someone else did it for you?
I have substantial amount of brushed aluminium effect vinyl left, I used in my previous car so Might be doing that some day. Not sure yet but would like to cover damages previous owner did, near the front ashtray. Hated them since ownership but cannot be bothered to go through all the faff with console out job. This is my daily driver and have two kinds at home so it's kinda difficult.
Myself. As my tunel was scuffed and schrached i did this and it looks great ! . It took me 4h , used my wifes hairdryer as i dont have a heat gun
Here is how to take the console out
Sent from my SM-G950F using Tapatalk
can you explain little bit better how to put resistors to c6 saloon pre facelift model because there is only one cable that goes in whole light assembley so how to know which one is it?!
What wire?
Which light?
Which lamp?
Sent from my iPhone using Tapatalk
On your taillight
You put led turning light and reverse light so i see that you posted where you put your resistors but how did you know which wire is for turn and which for reverse
Sent from my iPhone using Tapatalk
Love those trousers.
Hahaha. I try but nights are the only time I have for myself and the car. Kids asleep, wife coped with, house chores done. It is from time to time I'll go downstairs and continue with projects and boy, they do get me going further. When you something you've worked for hard is looking better and better, it drives you by itself.Don't you sleep Kris.