Kufatec Loom

[Robin Chandler]

Hi,

I'm installing the Kufatec wiring loom for heated seats into my car and cant find the information anywhere for 2 of the wires. I know what wires go to what pins on the back of the climate unit and I know that the Red/White wire goes to the fuse board with appropriate fuse.

The only issue I have is the two grey wires with KL30 written on them? do these also go to the fuse board? what size fuse should they have and what number fuse if they do?

Also has anyone put 8v heated seats in and do they know how to convert the pins from the 8v seat to an 8p connector?

Sorry for all the questions! I have researched this for a couple of weeks now and cant find the answer!

Many thanks in advance.

 

[ch1z64]

Not saying this link will help you but these guys av been chatting about the same . If you read down you will find a member who had wire diagram so it might help . ( http://www.audi-sport.net/xf/threads/retrofit-harness-heated-seats-audi-a3-8v.265950/ )

 

[aqibi2000]

KL30 means constant 12V (always on) then the series fuse you may find the size by asking Kufatec directly