Little update for you guys. Badger5 have been working away on the build…. Alex has started putting together the custom fuel system together which consists of….
.AN6 fuel lines
.AEM 400 fuel pump rated to 860bhp
.Turbo Smart fuel regulator rated to 1200bhp
.All AN fittings, etc
.A custom surge tank which will be housed in the rear wheel well along with my battery and water Meth tank.
.Fuel filter will be in the engine bay
.34 Motorsport high flow fuel rail
.1000cc injectors but we may go bigger
B5 have also managed to fit my 3.5” Zinram exhaust which doesn’t fit well! So bare that in mind who ever wants to buy one, they are cheap for what they are however you will need to modify them to fit perfectly which Alex has done.
He has also managed to get my 3.5” Downpipe made up and fitted, extremely tight fit!
Next up will be the wastegate pipe and then everything will be wrapped up in a BASALT sleeve I’ve managed to find which will make things much much easier hopefully!
Here is a picture of the engine bay currently, some might notice….. but we are going 5” turbo intake pipe, we figure as we are going big on everything else it makes sense to do everything big.
I’m also having a custom made catch can which I’ll eventually powdercoat in the same colour as my rocker cover. 1x AN20 coming out of the crankcase and 2x AN10’s coming out of the rocker cover.
The other thing we decided on was to go all new with the intercooler, it’ll be a 3” Wellycooler like I had before (old set up will be going up for sale) but we will be having 76mm pipework all the way around.
shouldn’t be long now before it’s up and running!!
Sent from my iPhone using Tapatalk
.AN6 fuel lines
.AEM 400 fuel pump rated to 860bhp
.Turbo Smart fuel regulator rated to 1200bhp
.All AN fittings, etc
.A custom surge tank which will be housed in the rear wheel well along with my battery and water Meth tank.
.Fuel filter will be in the engine bay
.34 Motorsport high flow fuel rail
.1000cc injectors but we may go bigger
B5 have also managed to fit my 3.5” Zinram exhaust which doesn’t fit well! So bare that in mind who ever wants to buy one, they are cheap for what they are however you will need to modify them to fit perfectly which Alex has done.
He has also managed to get my 3.5” Downpipe made up and fitted, extremely tight fit!
Next up will be the wastegate pipe and then everything will be wrapped up in a BASALT sleeve I’ve managed to find which will make things much much easier hopefully!
Here is a picture of the engine bay currently, some might notice….. but we are going 5” turbo intake pipe, we figure as we are going big on everything else it makes sense to do everything big.
I’m also having a custom made catch can which I’ll eventually powdercoat in the same colour as my rocker cover. 1x AN20 coming out of the crankcase and 2x AN10’s coming out of the rocker cover.
The other thing we decided on was to go all new with the intercooler, it’ll be a 3” Wellycooler like I had before (old set up will be going up for sale) but we will be having 76mm pipework all the way around.
shouldn’t be long now before it’s up and running!!
Sent from my iPhone using Tapatalk