Everything is malfunctioning

Steve-greek

Registered User
Joined
May 27, 2017
Messages
14
Reaction score
1
Points
3
Hello Everyone.

Hopefully someone will be able to suggest where to start with this one.

Driving my A6 2006. Got to a hill, put the parking brake on. Went to pull away as normal and the car just lit up like a Christmas tree, flashing red lights. Handbrake did realise.
The Car went into limp, no power.
Lost my speedo,
Power Steering went heavy
ABS light on
Traction Light on
Electronic handbrake malfunction in DIS. And not working.

Did a quick scan and 6 modules are showing malfunction?

Chassis Type: 4F0
Scan: 01 03 05 07 08 09 0E 15 16 17 19 37 42 46 47 4F 52 53 56 61 62 72
Mileage: 99390km-61758miles
00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
07-Control Head -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
0E-Media Player 1 -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: Malfunction 0010
47-Sound System -- Status: OK 0000
4F-Centr. Electr. II -- Status: Malfunction 0010
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: Malfunction 0010
56-Radio -- Status: Malfunction 0010
61-Battery Regul. -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000

Only Fault codes are:

Address 19: CAN Gateway Labels:. 4F0-910-468.clb

Part No SW: 4F0 910 468 A HW: 4F0 907 468 D

Component: Gateway H11 0070

Revision: 11 Serial number: 13008069278032

Coding: 6CEE53C41B2104

Shop #: WSC 02334 785 00200

VCID: 275D4D9E96ED127C79-8072


1 Fault Found:

00470 - Company Comfort Databus in Single Wire

011 - Open Circuit

Freeze Frame:

Fault Status: 01101011

Fault Priority: 3

Fault Frequency: 1

Reset counter: 225

Mileage: 99390 km

Time Indication: 0

Date: 2018.07.01

Time: 21:44:52

AND

Address 4F: Centr. Electr. II Labels: 4F0-910-280.lbl

Part No SW: 4F0 910 280 HW: 4F0 907 280 A

Component: ILM Beifahrer H10 0080

Revision: Serial number: 00000000289758

Coding: 0001104

Shop #: WSC 02323 785 00200

VCID: 5EB3287A893793B44A-800A


1 Fault Found:

01316 - ABS Control Module

013 - Check DTC Memory

Freeze Frame:

Fault Status: 01101101

Fault Priority: 3

Fault Frequency: 1

Reset counter: 225

Mileage: 99388 km

Time Indication: 0

Date: 2018.07.01

Time: 21:44:00


Freeze Frame:

Voltage: 11.900 V

Temperature: 32.0°C


Im dont even have a clue where to start with this. Any help would be a big help
 
I dont know if this may be the same, but on my passat with an EPB after wading thru slush ( IE having fun) I had got water in one of the jacks on the back of the EPB motor, the dash was blinking several lights. I wouldn't know about limp mode because i could not move.
I solved it with water dispeller
Had you been wading through water or deep puddles ?
 
With this weather, it hasn't seen water now for at least 2 weeks.
 
Anyone Got any idea where i need to start on this one?
 

Similar threads

Replies
12
Views
1K
Replies
6
Views
2K
NHN
Replies
8
Views
1K
Replies
7
Views
2K