Front brakes

[Rob1967]

Changed pads and discs today . I removed cap and piston pushed back freely on both sides. I did not open any nipples or joint. I did what I had to do put it all back together pumped pedal and went hard .i went out 5 minutes later and pedal goes halfway down.there is no leaks
Any help appreciated
Thanks

 

[CJGREEN89]

I've had the same since I did mine. Got used to it now but it's annoying.

Sent from my SM-G950F using Tapatalk

 

[Retroman]

1) Pedal hardness sinking to floor when constant pressure applied?
2) Pedal hardness point rising if pedal pumped?
I assume the fluid level is at the max level (neither above nor below) in brake fluid reservoir? If the answer to both the two questions above is "no", then I would suspect that the pedal firmness will improve once the pads have "bedded-in" after around 300 miles of general, variable conditions driving.