"Should" be as in if the manufacturers wanted to do things properly, but very rarely are. Usually overall weight is relatively decent but end to end not so much. Shouldn't be a major issue though.@Rainbird I'm not actually sure if they balanced the rods, I think good aftermarket rods should be shipped well ballanced
Ah I see, thanks Stuart.@desertstorm pointed out they are identical to the FCP x-beam rods - Karl must have a keen eye.
https://fcp-engineering.com/en/audi...3-audi-18-20-16v-20v-144mm-s3-tt-x-beams.html
View attachment 175745
View attachment 175746
They also sell H-Beam connecting rods?
View attachment 175747
when are you getting this altogether? pretty exciting times? have you sorted out the Left Hand Drive 80mm TIP now?
Yep, when I search the part number I only get 550cc ones not 610cc as listed on Badgers storeThat's interesting as they are the same part number as the bosch 550s I bought I assumed they just setup for a 4bar fpr
searched what part number?That's interesting as they are the same part number as the bosch 550s I bought I assumed they just setup for a 4bar fpr
You are calling him (and me) a fool for assuming the product picture in your store is the actual product?searched what part number?
the library one off the webshop? more fool you if so..
more fool folks looking at a website, taking a part number and using it to buy their own.... Not aiming at you, stuart namely I replied to.You are calling him (and me) a fool for assuming the product picture in your store is the actual product?
indeed..It's weird 117s are 550cc @3bar and 123s are 630cc @3bar
more fool folks looking at a website, taking a part number and using it to buy their own.... Not aiming at you, stuart namely I replied to.
library pictures.. 550cc and 610cc look the same, the part numbers are obviously not the same, and I don't typically publish numbers for folks to use us to find products to buy elsewhere.
check again dear Stuart - and you will find JUST FOR YOU its now with added (library picture)that feels a little personal - we are either all fools or none of us are fools for comparing web sites and part numbers
You could maybe state on your site that the picture is just for illustration only as some people would be interested in getting the "best possible injectors" for the "best possible price" after all the effort and research you have done, but would mistakenly go elsewhere when they were looking for 600's but saw the part number is only for 550, so you may have lost some people's business; especially considering you are cheaper for your Bosch 610cc injectors than Awesome for their Bosch 550s (If I remember rightly)
The adapters I found were a challenge but £6 for 8 delivered, is pretty good considering.
View attachment 176268
It is mounted, it's just hard to see from the photo. And @desertstorm - they are not tired, that's just how the look. Koni shocks. Not sure about model or anything, they came with the car.your "optimised pipe" has not bracketery to stop it flopping about on and off boost... (silicon bends will want to straighten under boost)