So having recently added UV dye to the system I can see that there is staining on the lower right of the AC condenser (as you look at the car) hoping it’s just a hose seal (as firebits suggested) but I fear it’s the condenser!
Has anyone done a DIY replacement?
Has anyone used a non Audi condenser- there seems to be a level of fragility with Audi’s own offerings.
Can anyone comment on the replacement or lubrication of O-rings for ac units ??
If it turns out to be a stone that’s holed the rad and I end up put in an Audi condenser, I’m Thinking of adding a stone screen to prevent that happening again.
Any advice Or experience much appreciated.
Has anyone done a DIY replacement?
Has anyone used a non Audi condenser- there seems to be a level of fragility with Audi’s own offerings.
Can anyone comment on the replacement or lubrication of O-rings for ac units ??
If it turns out to be a stone that’s holed the rad and I end up put in an Audi condenser, I’m Thinking of adding a stone screen to prevent that happening again.
Any advice Or experience much appreciated.