Adjust position of removed elec seats

[Super Nintendo Chalmers]

I need to adjust my front electric seats in order to package and deliver.

I definitely don't want to refit them to the car do achieve this. So wondering if i can

a) connect a battery to them directly

or

b) extend cabling to the original loom/connectors in the car.

For this i'm thinking that i can connect live and ground - would this work?

If so, which pins in the connectors are live and ground?

Any other ideas welcome!

 

[OliNix]

Yes you can power them with 12V and adjust them.

Easiest way to find the pins is with a volt meter and the plug in the car. The thicker cables are usually power.


OliNix
B8.5 S4 Avant - Glacier White

 

[Super Nintendo Chalmers]

That is roughly what I had in mind!

If I understand correctly the red connector block is all power, so is it a case of connecting the multi meter to pins in various combos until I read 12V?

Obviously I'd need to get the polarity correct. I'm sure I've seen threads where someone has helpfully labelled the pins...

Thanks.

 

[OliNix]

Yep that roughly what I had in kind.

If I understand correctly the red connector block is all power, so it's a case of connecting the multi meter to pins in various combos until I read 12V?

Thanks.

That’s the one!

 

[NHN]

Saw your WhatsApp bud, get back to you later, but yes its just 2 wires, brown obviously ground & I'll check the pics you sent before, but either straight red or red, black for 12v, that will allow them to move, push a folded wire into the pin hole side, done it many times for a temp movement.

Ping me a WhatsApp about it.

 

[briceportier]

Wiring diagram was just posted here: https://r.tapatalk.com/shareLink/to...&share_fid=17679&share_type=t&link_source=app

Sent from my SM-G965F using Tapatalk