what are good values to be reading on pd100 injectors?

[curtis92]

i am pretty sure i have a leaking injector, oily smell in exhaust and very slow oil drain with no leak, i have vcds and just want to know what i should be looking at for the injectors, and also if these injectors work in pairs? im assuming so but i just wanted to get some accurate information to go off so i can find this leak and get my engine back running smooth on idle again, thanks for any help


Sent from my iPhone using Tapatalk

 

[curtis92]

it also says i have a missfire in cyclinder 4, could this be right ?


Sent from my iPhone using Tapatalk

 

[curtis92]

also torsion value 1.5 degrees so should be fine


Sent from my iPhone using Tapatalk

 

[curtis92]

for anyone who actually had this problem and is new to this engine, cylinder 4 is furthest from the cambelt, the missfire is from faulty injector and most probably the loom (new one jus for safe measure), plenty of guides to change injectors on here and the values come up in vcds if you hover over the mg/str section, two of mine were out of numbers but 4 was the missfire and i dont have much money these days. cheers for everyone jumping to help out


Sent from my iPhone using Tapatalk