Hi guys. I’m after a bit of advice.
I’m planning on replacing the front anti roll bar bushes. How easy is it to do?
I’m planning on replacing the front anti roll bar bushes. How easy is it to do?
Anti roll bar bushes
- Thread starter Lee1976pr
- Start date
Not overly complicated nor too easy.
Pop the wheel to take a look, if the bolts aren't too rusty it's doable without much having to come off.
Can't attach a pic as on mobile
Pop the wheel to take a look, if the bolts aren't too rusty it's doable without much having to come off.
Can't attach a pic as on mobile
I’ve managed to undo the bolts but how do you separate the bracket to get the bushes out?
Heay. Hmm mine come apart, maybe they were taken apart in the past. Try to pry along the split line see if it opens. If not then you have to lube it and slide them out to drill or file the bracket apart (it's just pressed together). If it wont come off when lubed the rb has to come off which is a pita job (dropping subframe etc)
Thanks pal. I’ll have another look on the weekend. You don’t happen to know what size socket I need for the hub nut do you. I’ve got ball joints and a cv joint to do as well.
