luis.filipe
Registered User
Hello,
during the last week I took my 1.8T (AGU) to perform a oil pressure test
and a compression test.
The oil pressure test was fine, here are the values.
Idle - 1.5 bar (minimum was 2.0 bar)
2k rpm - 3.0 bar (values between 3.0 and 4.5 bar)
4k rpm - 4.0 bar
5k rpm - 4.0 bar
Only at idle speed we have less than what is written on Haynnes service manual.
Regarding the compression for a AGU engine when new we should expect something like 9.5:1.
Now here are the values that I got on the test:
Cylinder 1: 13.0
Cylinder 2: 12.75
Cylinder 3: 12.5
Cylinder 4: 13.0
Those values are very high for this engine and I will perform the test again at a different garage to see what I get.
Any ideias for this kind of values ? Carbon ?
Thanks in advance.
during the last week I took my 1.8T (AGU) to perform a oil pressure test
and a compression test.
The oil pressure test was fine, here are the values.
Idle - 1.5 bar (minimum was 2.0 bar)
2k rpm - 3.0 bar (values between 3.0 and 4.5 bar)
4k rpm - 4.0 bar
5k rpm - 4.0 bar
Only at idle speed we have less than what is written on Haynnes service manual.
Regarding the compression for a AGU engine when new we should expect something like 9.5:1.
Now here are the values that I got on the test:
Cylinder 1: 13.0
Cylinder 2: 12.75
Cylinder 3: 12.5
Cylinder 4: 13.0
Those values are very high for this engine and I will perform the test again at a different garage to see what I get.
Any ideias for this kind of values ? Carbon ?
Thanks in advance.