L
They landed this morning Demian.
Thanks
I'll post a pic up once theyre on. If they rub, it'll only be for a short while, till the wheels have made a home for themselves under the arches
Great!
They once again had a bit trouble finding you this morning but obviousley they came good in the end.
Damian @ DPM
Slight thread jack, sorrry - but has anyone fitted 10mm spacers to a standard (as in suspension) S-line? I'd really appreciate some pics from side-on and 3-quarter views if poss.
I'm beging to think I need a set but need to see pics before I buy.
Damian - do audi-sport.net members get a discount?
Does anyone else feel any slight vibration at motorway speeds when running the spacers?
Is this normal, or is there something I can be doing to help get rid of it.
I have 10mm hub centrics (courtesy fo Damian @ DPM - thanks again).
Any thoughts?
Hmmm, I have 10mm all round and get the occassional rub on the back arches as it is, especially when I ahve a passenger in the back.
Good luck with the 15's - I think lot's of people have had to change a specific screw holding the arch liner in place.
Instructions say tighten every 100kms
We recently done some 15mm rear spacers for Greg over in Ireland, i'm sure he'll be able to show some pics of his if he's about.
I'm sure we could something out for you!
Good man. Once I've seen some pics I think you'll be hearing from me.
Leon can you PM me what part numbers are on the boxes?
Damian @ DPM
That looks good mate!
Just need to get those fronts pushed out now
It's still on the cards yeah mate....
... jsut waiting on a few bits and pieces.
When was the rolling road day???
I'm hoping to get mine done soon, with before and after plots.
It is always best to get matched springs and shocks but on the new S3's the H&R springs seem to working really well, better then standard infact!
Damian @ DPM
Just a quick question...
I am thinking about buying H&R springs for my 8P S3 but will it be good to fit the springs on OEM shocks?
I have heard that if the shocks are made to work on a lower setting than the one they were designed for, they will either work bad or "discharge" and become ineffective in a short time...
Any advice?
If you get them i'm sure you won't regret it!
Damian @ DPM
Wilco.Ive been running standard shocks with H + R springs from DPM (think I was the first to do lowering and spacers on here!) with no adverse effects, transforms the handling mate so go for it!
Guys ,
Sorry , I have not read the entire thread so if I am repeating anything..appologies ..
I have found that the wheel rubs on the foam liner under the fender , not on any screws.
I have 15mm Eibachs allround and H+R sport springs as well .