no blink and beep from locking

[vinceemmery]

hi was coding my bt module today thought id change a few things eg start up screen (done great) the i thought i wouid activate the blink and beep on the car locking and unlocking, trouble is it wont let me change the code from 1 which is blink to 3 which is blink and beep it only goes to 1 and 2 on adaptation which is 1=blink 2=horn but not 3=blink and horn? any ideas

 

[Staz]

hi was coding my bt module today thought id change a few things eg start up screen (done great) the i thought i wouid activate the blink and beep on the car locking and unlocking, trouble is it wont let me change the code from 1 which is blink to 3 which is blink and beep it only goes to 1 and 2 on adaptation which is 1=blink 2=horn but not 3=blink and horn? any ideas

Go into the long coding helper and there's an option at the bottom of the byte for beeps and blinks which disabled changes. Deselect this bit.

 

[vinceemmery]

i dont understand how wouid this look like in vag com?

 

[vinceemmery]

yep done that works great many thanks