Front ARB

[Motormouth]

Hopefully, depends on the weather, going to do my front antiroll bar tomorrow. Done one on an octavia VRS before the bar looks the same, just wondered if its the same work on the S3 or if you have to do anything with the prop shaft.

Just dropped the subframe and fed it through on the octavia. Anyone on here got any experience doing the job and any tips would be much appreciated.

Thanks Jim.

 

[fingermouse]

just drop the sub frame also think there is a 10mm bold head on the passenger side to undo , think its a clamp that holds a dtearing rack pipe. nothing much to it if you have done a simular one before

 

[Motormouth]

Just finished it tonight, started yesterday afternoon but it went dark before I finished it. Unbolted the ARB clamps and tie rods, also that power steering pipe clamp that mounts onto one of the clamps, removing that nut was the hardest bit! unbolted the steering rack, gearbox and exhaust mount then lowered the subframe. Slid the ARB out to the rear of the car, swapped everything over and refitted.

Not too difficult a job just time consuming and not much fun in the cold, glad its done and no more knocking from the front.