- Joined
- Jul 4, 2007
- Messages
- 17,105
- Reaction score
- 719
- Points
- 113
- Location
- Salford, Manchester
- Website
- www.facebook.com
BIG PROBLEM:
When i enable the light/rain sensor on VCDS a error message comes up on the DIS saying that the light and rain sensor is defective.
There are 2 error messages that come up on VCDS but i am now at work and dont have the error log with me. 1 is about the actual sensor and the other is about the canbus connection saying no signal.
Can anyone advise which pin is no.3 on block F so i can confirm that this is connected properly?
thanks
In what respect spliced, you mean if installed from factory, if so then its all built into the cars original looms, if doing after purchase then new loom added with pins on ends to plum into connectors.
Are you sure? There will be no markings to say, but if you leave the wiper stalk in the intermittent setting, it should work on auto.Semi-related = I bought mine with auto lights, auto dim and leaving/coming home lights (53 plate). No sign of auto wipers....is that normal?
I'm retrofitting it to mine, can i use any rain sensor as long as it fits into the mirror? The prices on ebay vary a LOT!Yes the older ones didn't have rain sensors. Just a light sensor on the back if the rear view mirror
forgot to ask you ash what part no do you have for the rls sensor your using and which cent electric box revision.think its the sensors tried 2 of them in in laws golf with auto light /wipers both come up with same faults ,think there an incompatabilty issue .
golf uses the square sensor where it seems the audi uses the round smaller type .
cant for the life of me get the tt light switch even tps sheffield haven't got stock
Anyone with a wiring diagram?I think if you need a new one then the insurance route for the windscreen is the better. (I'm not suggesting fraud, simply suggesting if the screen requires replacing due to damage it seems a good option)
Loom - I'd buy this http://www.kufatec.de/shop/product_...g-Interior-Mirror---Harness---Audi-A3-8P.html
Kufatec don't seem to provide any installation instructions to you'll need someone to look that up for you.