Dennis Moeller
Registered User
Once again chaps I have to you ask you for some help...
I'm ready to order H&R spacers for the rear axle but I'm split between 15 or 20mm at each side. I have 8.5" rims offset 30 mounted with 225/40-18 tires. Also I will install Neuspeed adjustable tie bars and have rear camber set at 0.5 - 0.75 degrees.
Simply put; I would like the edge of the rims to flush perfectly with the edges of the rear part of the body (fenders..., is that the word??). Tires will stretch a little but that's fine...visually the alu rims must sit 99% flush with the top of the body...
So guys, what do you think; 15 or 20mm?
Cheers
I'm ready to order H&R spacers for the rear axle but I'm split between 15 or 20mm at each side. I have 8.5" rims offset 30 mounted with 225/40-18 tires. Also I will install Neuspeed adjustable tie bars and have rear camber set at 0.5 - 0.75 degrees.
Simply put; I would like the edge of the rims to flush perfectly with the edges of the rear part of the body (fenders..., is that the word??). Tires will stretch a little but that's fine...visually the alu rims must sit 99% flush with the top of the body...
So guys, what do you think; 15 or 20mm?
Cheers