Search results for query: *

I don't know if I understand you correctly. Is it bad to share this?

3 canbus solved the communication between the radio and the dashboard, steering wheel control, comfort communication, but the parking radar does not work. Audi is really special and I have nothing else to try. My opinion is also that the radio does not have good canbus protocols. I think that...

Does your vehicle start/stop? It's the 188kW? I would still try to let them run idle without adding gas if the sound does not appear. And try to drop the belt and exclude helping aggregates. It will look difficult because it takes about a second and only cold.

Alternatively, there will be someone here with the same problem and find a solution for you.

Are you running out of water? By the sound of it, it could be a lot of things. I don't know your engine exactly, but I assume that it has a timing belt and cams connected by a chain. Also a chain for the balancing shafts. dave_beastttt may be right. I don't know exactly how the oil pump is...

Ok. So when it started doing this after the replacement, it would be good to check if you have connected something wrong. Sometimes it is not visible at first glance. For example, a quick coupling on a hose that has not been engaged will result in a bad seal and thus a leak. Check everything...

Did it start doing it after the replacement? Didn't it happen before? How much oil do you add between oil changes? Try to save it on youtube and share the link. Record with openned hood

Write the specific type of engine, volume, code designation, number of km, used engine oil, last major work on the engine. If possible, try to record the sound and send it here. Maybe I can advise you

Insert key 1 into the ignition while holding the lock on the key for about a few seconds. The same with key 2. The ignition must be on, not position 1 (hold the lock until the ignition is turned off) Good luck

You have only two options. I think that 12v must be for both antennas - (the center not the edge). Measure the output terminals of the antennas on the radio and then do not disconnect the antennas from the radio but at the amplifiers and try to measure if 12v is going there as well. It's called...

Previously I saw the radio as another unit in the obd. After the replacement, it is no longer possible to access the radio.

After a very long time, I returned to the issue of Audi and Chinese radio. No one, absolutely no one can advise me and get answers as to how it can't be done. Trust me, almost anything is possible. I still have an audi a3 2009. I decided on win not android. The gist is the same, but wince is...

Yes you can no longer set the radio via obd. Your car thinks you have a Chorus if you haven't decoded him. I think that was china and was designed for a3. PX5 octa core 4gb ram 32gb rom android 10. Only the steering wheel controls worked there and radio features of course. Nothing more about...

What radio did you change the android for? You have a3 what year can I ask? I don't think any android radio can compare with the original and therefore rns-e oem. You need many things for 35% working. Canbus adapter, antena adapter, shaft adjustment and a lot of nonsensical cabling. Obd no more...

Search at the top of the intake manifold. Tell more information. Engine code and the reason why you are looking for it.

Door control module 80% cables in adapter in the doorway. They are broken and ragged - easy to check. Air condition unit for first try factory settings, check the cabling behind the unit. If no help try replacing the unit with another or new one. It is very easy to exchange. Good luck

Hello all. I am new here. I am Slovak for the introduction and therefore your language is not my natural so I apologize in advance. What i can't write, translate in google. I have audi a3 12.2009 sportback gen2 1.8 tfsi cdaa 118kw dsg ag7. My original radio 8P0035186P. Air condition 8P0820043BH...