Thanks for your reply @MT-V6For the 2006 module do you mean 8P>0< 907 357 F ? As the 8P3 part isn't a valid part number. If so, it was fitted to the A3 between 2004-2007. It was superseded by G, H, J, L and M
8P3 907 357 was fitted between 2009-2013. It was superseded by A and B.
Therefore though all are probably compatible and it's not clear what the difference is, the B version is the latest revision and so I would stick with that for now, subject to my previous post regarding the canbus
Yes the part number for the 2006 is 8P0…
Also the instructions from kufatec say that the coding should be 0000003 for vehicles up to 2009 and when I try this with the module 8P3907357B it won’t accept it.
I’m pretty sure the wiring is correct at the canbus gateway (or as sure as the kufatec cables are) I will investigate that too.. there were 2 cables going to the canbus can high and can low to pins 16 and 6. I’m kinda running out of options here and it’s really frustrating as I love those lights and wanted to finish the retrofit properly and keep the cost as low obviously . Now waiting for the A version of the levelling controller but don’t know if that’s going to make a difference.
Any ideas as to why I can’t change the