Will there wheels fit?

[Rifleko]

Hello guys, im looking for wheel upgrage for my S3 8L 1999.
I was thinking if OZ racing Chronos 5x100 16" 7"width, 56,1 bore and offset 35 would fit?
What do i need to make it fit?
Do i need those plastic rings, how are they called....
Any help will be appreciated.

 

[Alex C]

spigot rings - the spigot on the S3 is 57.1mm so I don't think you will be able to get the wheel on. Are you sure its a 56.1mm bore

 

[Rifleko]

Im pretty sure yeah... so even with spigot rings it wont fit?

 

[Alex C]

don't think so, no, the centre bore of the wheel is smaller than the spigot of the hub on the car, if you put a spigot ring on then you are only going to make the centre bore of the wheel even smaller.

Usually, with after market wheels, the centre bore of the wheel is oversized so that you can chuck which ever spigot ring in you need to bring the centre bore diameter down to match the hub on your car. Doing it that way means that an aftermarket wheel can potentially be fitted to different cars with different hub dimensions just by using different sized spigot rings

 

[16Klappe]

Won't fit.

You would have to have the centre bore machined out.

Not worth it.