Ginger9860
Registered User
- Joined
- Oct 8, 2014
- Messages
- 33
- Reaction score
- 0
- Points
- 6
- Age
- 33
Hi Chaps,
New on here and recently purchased an S3 AMK 210
I was hoping someone may be able to shed some light on my cooling fan situation,
With the engine running up to 100deg the cooling fan is no where to be heard. I have checked the green fuses above the battery and all ok with no corrosion. Further to this i have tested the fan by bypassing the switch in the rad and the fans work indicating a dodgy fan switch. I have replaced this and still we have no fan coming on at high temp.
Is the fan control unit useful in the circuit after the fan switch? Being that the fan switch is not causing the issue i am stumped to what this may be? If the control unit is at fault, i would assume the fan would not work at all whilst bypassing that switch?
Any help would be great
Thanks
Jim.
New on here and recently purchased an S3 AMK 210
I was hoping someone may be able to shed some light on my cooling fan situation,
With the engine running up to 100deg the cooling fan is no where to be heard. I have checked the green fuses above the battery and all ok with no corrosion. Further to this i have tested the fan by bypassing the switch in the rad and the fans work indicating a dodgy fan switch. I have replaced this and still we have no fan coming on at high temp.
Is the fan control unit useful in the circuit after the fan switch? Being that the fan switch is not causing the issue i am stumped to what this may be? If the control unit is at fault, i would assume the fan would not work at all whilst bypassing that switch?
Any help would be great
Thanks
Jim.