FMIC wellycooler?

[Xmldrivera4]

I need to get an FMIC for my a4 1.8t b6. Looking at spending less than £200 if possible.

Does anyone have any suggestions? Looked on eBay but don't really know what to look for and what's good/bad.

Any help appreciated!!

Is this one any good?

http://pages.ebay.com/link/?nav=item.view&alt=web&id=200555031261

 

[Xmldrivera4]

Or this one? What's the difference?

http://pages.ebay.com/link/?nav=item.view&alt=web&id=400215244689

 

[Xmldrivera4]

Or this ?!?!

http://pages.ebay.com/link/?nav=item.view&alt=web&id=181122984325

 

[beachbuggy]

A4's are a bit restricted to what you can fit as the space behind the bumper isn't as good as the a3's and then the pipe work also is a bit tricky.. Wellycooler almost certainly wouldn't fit without cutting the bumper bar, which I would advise against. There are a few complete kits on ebay which fit pretty well and aren't too badly priced but do run 2 or 2.25" pipe work which isn't ideal but for a K03 turbo, even the K04-015 is probably more than ok,

 

[Xmldrivera4]

Thanks for the info!
Went for this one in the end. Do you think it will fit?

http://pages.ebay.com/link/?nav=item.view&alt=web&id=200555031261

 

[ruffrida]

That looks a nice bit of kit

 

[Xmldrivera4]

That's what I thought but I'm worried it's too big!

 

[Xmldrivera4]

Do you think it'll fit OK?

 

[beachbuggy]

Looks like the kit I ran on my a4 hybrid build last year.. Fitted well just the pipes stuck out the lower grills slightly so needed the rear of the grills cutting back to get them to fit back.. Ended up using a couple of black cable ties to secure, you'd have never known once complete but it's not a direct not adjustment fit though, but for the price it works well as a kit