Car: Audi A4 B8 - 2010 - 2.0 TDie
Recently the engine management light has appeared on my dashboard, i have scanned with VCDS, the result:
Address 01: Engine (J623-CAGB)
2 Faults Found:
5262 - Diesel Particle Filter; Differential Pressure Sensor
P2454 00 [168] - Short to GND
MIL ON - Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 88
Mileage: 119036 km
Date: 2015.03.28
Time: 13:33:12
5162 - Diesel Particle Filter; Differential Pressure Sensor
P2453 00 [096] - Implausible Signal
Intermittent - Not Confirmed - Tested Since Memory Clear
Readiness: 1 1 0 0 0
I have bought the replacement sensor, part number: 059 906 051 A
Now the question is, does anyone know how or if the sensor will need calibrating once installed??
I have VCDS and the mechanic I intend to visit has Snap-On, but between us we are not 100%
Any advice is greatly appreciated
Recently the engine management light has appeared on my dashboard, i have scanned with VCDS, the result:
Address 01: Engine (J623-CAGB)
2 Faults Found:
5262 - Diesel Particle Filter; Differential Pressure Sensor
P2454 00 [168] - Short to GND
MIL ON - Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 88
Mileage: 119036 km
Date: 2015.03.28
Time: 13:33:12
5162 - Diesel Particle Filter; Differential Pressure Sensor
P2453 00 [096] - Implausible Signal
Intermittent - Not Confirmed - Tested Since Memory Clear
Readiness: 1 1 0 0 0
I have bought the replacement sensor, part number: 059 906 051 A
Now the question is, does anyone know how or if the sensor will need calibrating once installed??
I have VCDS and the mechanic I intend to visit has Snap-On, but between us we are not 100%
Any advice is greatly appreciated