Milltek exhaust sagging

[Nightmare1708]

Hey guys, I was just wondering if anyone with the Milltek exhaust experienced any sagging after fitting it.I tried lifting the tips up and then tightening all the clamps while holding it but there's a 3 finger gap between the diffuser and the tips. All the pictures I've seen are a perfect fit. Anybody know how to adjust it properly?

 

[paulk]

Looks like you need better rubbers as the exhaust seems to have pulled them

 

[Dandanfings]

Can bend the mounts a little bit.
Must say they are lovely tips!

 

[Steph67]

Mine hasn't moved since fitting, but should be an easy fix with a little adjustment of the hangers, as suggested above.

Like the tips, I wanted those but they weren't in stock so I went with the black ones.

 

[alijnclarke]

Good luck if you have to deal with Milltek directly.

 

[Nightmare1708]

I went and got it sorted out today. One of the rubber hanger was too short so I replaced it with a longer one and now everything is perfect.

 

[tektrob]

I must say it does look very nice

 

[DAZMC]

What tips are they ?

 

[Nightmare1708]

Those are the polished round tips.