eyeball paul 79
Registered User
- Joined
- May 8, 2015
- Messages
- 7
- Reaction score
- 0
- Points
- 1
Hi hope someone can help.
I had a new camshaft fitted and things went wrong , so it went to another garage to be repaired.
Before the repair the car use to start on the button flawlessly.
Now it starts perfect sometimes but not others. When it cranks it dips slightly then fires. Sometimes it take about 8 times to start. If parked pointing up hill for a few hours it won't start.
It has had the following
New air filter
New Bosch oil and fuel filter.
New fuel filter check valve.
New map sensor.
New temperature sensor.
New maf.
New egr.
Synchro angle is set to 0
New cambelt.
New water pump
New starter motor.
Could the cam sensor be bad it doesn't show Any faults with vagcom.
I had a new camshaft fitted and things went wrong , so it went to another garage to be repaired.
Before the repair the car use to start on the button flawlessly.
Now it starts perfect sometimes but not others. When it cranks it dips slightly then fires. Sometimes it take about 8 times to start. If parked pointing up hill for a few hours it won't start.
It has had the following
New air filter
New Bosch oil and fuel filter.
New fuel filter check valve.
New map sensor.
New temperature sensor.
New maf.
New egr.
Synchro angle is set to 0
New cambelt.
New water pump
New starter motor.
Could the cam sensor be bad it doesn't show Any faults with vagcom.