Track rod ends - recommendation / S-Line difference?

[LayerzA3]

Hi all,

My passenger side track rod end is in need of changing on my 2.5 TDIQ Advant.
Quick couple of questions:
-ECP reg match both normal and Sline parts but no specs to hint at the differences, does anyone know what these may be (looking at TRW/Lemforder either way)
- I'll be doing both sides anyway as will get it aligned after, are they any other whilst you are in there jobs?
- Other then getting some penetrating oil on things nice and early, any other tips I should know about for this job that can catch you out?

 

[Jacko1]

Yeah your right, they def need a good soak for about 4 days prior to doing the job as they tend to seize and are a total bitch!!! , this stuff is the ********
http://www.ebay.co.uk/itm/PlusGas-F...d=132148945701&_trksid=p2385738.c100677.m4598

 

[QuattroCalum]

If you have a good budget just change the lot, much quicker and easier http://www.ebay.co.uk/itm/FOR-AUDI-...del:A4&hash=item233523c674:g:3UEAAOxyRhBS3rY3
Or if you are on a budget http://www.ebay.co.uk/itm/FOR-AUDI-...del:A4&hash=item233523c674:g:3UEAAOxyRhBS3rY3

 

[LayerzA3]

Thanks - that appears to be the same link twice.

It will make sense to do both bits at once on both sides - does anything know if the S-line ones are potentially softer/stiffer/it S-line so add a few quid?

The job is not now the most urgent but it will be within a month or two - not working out other bits to attendant to whilst in there.

 

[QuattroCalum]

Thanks - that appears to be the same link twice.

It will make sense to do both bits at once on both sides - does anything know if the S-line ones are potentially softer/stiffer/it S-line so add a few quid?

The job is not now the most urgent but it will be within a month or two - not working out other bits to attendant to whilst in there.

My mistake, here you are http://www.ebay.co.uk/itm/AUDI-A4-1...d=151215392372&_trksid=p2045573.c100033.m2042