Hey Everyone,
So I’m putting together an essential “everyday” tool kit together for the Audi S3. Now I know this will probably suit most VAG cars.
This is the list I have so far -
10mm Socket - 3/8”
13mm Socket - 3/8”
Tx20 Socket - 3/8”
Tx25 Socket - 3/8”
Tx30 Socket - 3/8”
5mm Hex Socket - 3/8”
6mm Hex Socket - 3/8”
6mm Triple Square Socket - 3/8”
8mm Triple Square Socket - 3/8”
10mm Triple Square Socket - 3/8”
75mm Extension - 3/8”
150mm Extension - 3/8”
200mm Extension with sliding 3/8” Socket
3/8” 52 fine tooth ratchet
3/8” screwdriver bit adaptor
Various sized flat and pozi bits to fit adaptor
3/8” Socket rail or custom foam box.
These Socket and bit types are the most commonly used to my knowledge with VAG cars. I was going to source all these and have them in the car at all times. Brand wise I’m heading towards Teng, Mac, Snap On.
Price wise, looking at between £100-£120! These won’t just be used in emergency’s but when ever I’m working on there car as well, so a worthy investment I thought.
Any advice, suggestions are welcome or any other sockets and bits I’m missing that I should consider.
Sent from my iPhone using Tapatalk
So I’m putting together an essential “everyday” tool kit together for the Audi S3. Now I know this will probably suit most VAG cars.
This is the list I have so far -
10mm Socket - 3/8”
13mm Socket - 3/8”
Tx20 Socket - 3/8”
Tx25 Socket - 3/8”
Tx30 Socket - 3/8”
5mm Hex Socket - 3/8”
6mm Hex Socket - 3/8”
6mm Triple Square Socket - 3/8”
8mm Triple Square Socket - 3/8”
10mm Triple Square Socket - 3/8”
75mm Extension - 3/8”
150mm Extension - 3/8”
200mm Extension with sliding 3/8” Socket
3/8” 52 fine tooth ratchet
3/8” screwdriver bit adaptor
Various sized flat and pozi bits to fit adaptor
3/8” Socket rail or custom foam box.
These Socket and bit types are the most commonly used to my knowledge with VAG cars. I was going to source all these and have them in the car at all times. Brand wise I’m heading towards Teng, Mac, Snap On.
Price wise, looking at between £100-£120! These won’t just be used in emergency’s but when ever I’m working on there car as well, so a worthy investment I thought.
Any advice, suggestions are welcome or any other sockets and bits I’m missing that I should consider.
Sent from my iPhone using Tapatalk