What spigot rings do I need?

[Abz99]

Got some 19" alloys yesterday. 19x8J ET45 however no bore written on the website, I think it's 66.6 or something. My originals were 57.1 so do I need to get 66.6 to 57.1, I'm getting vibrations at 70+ mph, and was told this is the fix.

Cheers in advance

 

[LEE69]

yes they will fit it

 

[ch1z64]

Yip defo 57.1mm

 

[Abz99]

yes they will fit it

Yip defo 57.1mm

Perfect. Cheers lads

 

[ch1z64]

Perfect. Cheers lads

Just i noticed a member selling 19" and he mention if you put on your car you would need 66.6 down to 57.1mm ,
I will no forget that car in a hurry , no a good getaway one

 

[Abz99]

Just i noticed a member selling 19" and he mention if you put on your car you would need 66.6 down to 57.1mm ,
I will no forget that car in a hurry , no a good getaway one

Nice one, I’ll be sure to get a set.

My feet are quick enough if we’re on about getaway

 

[ch1z64]

Nice one, I’ll be sure to get a set.

My feet are quick enough if we’re on about getaway

You might want to have a look around the site to see if you get any rub with 19" , if i mind sure lads spoke about rubbing in Arches but i could easily be wrong mate ,all the best

 

[Abz99]

You might want to have a look around the site to see if you get any rub with 19" , if i mind sure lads spoke about rubbing in Arches but i could easily be wrong mate ,all the best

Yeah that might be the case with lowering, I’ll have to check since I’m thinking of putting on coil overs. Thanks once again mate