I would print off the document I've sent and show them that. It is a printout from Elsawin which is the official VAG workshop manual.
Sensors 1,2 & 3 are all different whereas there are two identical sensor 4's, one for each pipe out of the DPF. That's why they are described as for bank
I would print off the document I've sent and show them that. It is a printout from Elsawin which is the official VAG workshop manual.
Sensors 1,2 & 3 are all different whereas there are two identical sensor 4's, one for each pipe out of the DPF. That's why they are described as for bank 1 or bank 2. The reason I have this info is that sensor 3 went faulty on my Bitdi.
VCDS gave the following error
1 Fault Found:
5257 - Exhaust Gas Temperature Sensor; B1 S3
P242A 00 [175] - Malfunction
I took it to a local Audi independent and they changed sensor 3 (g495) which is before the DPF just after the catalytic converter. That was 3 years ago and no trouble since.
I would print off the document I've sent and show them that. It is a printout from Elsawin which is the official VAG workshop manual.
Sensors 1,2 & 3 are all different whereas there are two identical sensor 4's, one for each pipe out of the DPF. That's why they are described as for bank 1 or bank 2. The reason I have this info is that sensor 3 went faulty on my Bitdi.
VCDS gave the following error
1 Fault Found:
5257 - Exhaust Gas Temperature Sensor; B1 S3
P242A 00 [175] - Malfunction
I took it to a local Audi independent and they changed sensor 3 (g495) which is before the DPF just after the catalytic converter. That was 3 years ago and no trouble since.
1 or bank 2. The reason I have this info is that sensor 3 went faulty on my Bitdi.
VCDS gave the following error
1 Fault Found:
5257 - Exhaust Gas Temperature Sensor; B1 S3
P242A 00 [175] - Malfunction
I took it to a local Audi independent and they changed sensor 3 (g495) which is before the DPF just after the catalytic converter. That was 3 years ago and no trouble since.