Sorry @<tuffty/> for a lot of questions, but I really want this project to make best as possible.
in some of the ealry post related for FPR(4bar) that I wanted to use you said "As you are only using a G25-550 I can't see why you would max out 1000cc injectors... I would start off with a 3bar FPR as this will give you better low pulsewidth performance on the injectors"
I'm planning to buy https://www.bosch-motorsport-shop.com.au/980cc-min-ev14-injector 0 280 158 040 They are 980cc I don't need to go above 1000cc this is enough?
Cheers,
Djordje
in some of the ealry post related for FPR(4bar) that I wanted to use you said "As you are only using a G25-550 I can't see why you would max out 1000cc injectors... I would start off with a 3bar FPR as this will give you better low pulsewidth performance on the injectors"
I'm planning to buy https://www.bosch-motorsport-shop.com.au/980cc-min-ev14-injector 0 280 158 040 They are 980cc I don't need to go above 1000cc this is enough?
Cheers,
Djordje