Afternoon all! Ok, so I know I am doing this probably 10 years after most people did this... But I'm doing the rear PDC retro-fit on a S3 2010 - 8P I've just bought (as a bit of fun.)
Having trawled through dozens of threads on various forums about PDC retro-fit (and found most of the embedded pictures and links now being dead due to the age of the posts), I've found lots of helpful info on the install itself, BUT I have hit a bit of a brick wall on the CAN High Low wiring, i.e. specifically where I can take these from. There's been mention of them in the other posts, but they fail short of actually showing where and specifically the wires to use...
I am just wanting to know which CAN High and Low wires I can piggy-back from for the rear PDC. I have the kufatec loom ( 34479-1), which assumes I'll be taking them from somewhere at the front of the car, but I can open the loom cable and connect at the rear of the car if it's simpler.
I'm no expert in car wiring and definitely know nothing about CAN! So I'm really looking for an idiots guide to the specific location, pin numbers, wire colours and ideally a photo (yep properly lazy I know!) to save me from having to download wiring schematics and learn and understand CAN gateways...!
Many thanks in advance!
Having trawled through dozens of threads on various forums about PDC retro-fit (and found most of the embedded pictures and links now being dead due to the age of the posts), I've found lots of helpful info on the install itself, BUT I have hit a bit of a brick wall on the CAN High Low wiring, i.e. specifically where I can take these from. There's been mention of them in the other posts, but they fail short of actually showing where and specifically the wires to use...
I am just wanting to know which CAN High and Low wires I can piggy-back from for the rear PDC. I have the kufatec loom ( 34479-1), which assumes I'll be taking them from somewhere at the front of the car, but I can open the loom cable and connect at the rear of the car if it's simpler.
I'm no expert in car wiring and definitely know nothing about CAN! So I'm really looking for an idiots guide to the specific location, pin numbers, wire colours and ideally a photo (yep properly lazy I know!) to save me from having to download wiring schematics and learn and understand CAN gateways...!
Many thanks in advance!