Just for the car with a slipping clutch, also all gear changes are difficult
Must I replace the dm flywheel? Or can I just do the release bearing, clutch and pressure plate?
Not looking to do the slave cylinder either
want some opinions other than just do it because it’s all apart. I don’t...
Looking for advise for tried and tested tab repair for ABS:
-JB Plasticweld remains flexible
-Araldite epoxy chips off easily
want something that stays solid and actually adheres to the ABS, 4 tabs abs various ABS bits to fix
Thanks
What’s a good crimp to use in order to join 30+ harness wires for an engine bay? Not using spade connectors nor the barrel version of the spade connectors.
-need to get a ratchet crimp too
-will use glue lined heatshrink on top but not solderibgvte wires.
please advise, maybe eBay links too...
We have a 2016 8V it has the dechrome’d trim on the windows and the front bumper etc like the black edition cars.
There is clear corrosion bubbling under 2 of the windows black trims, should this be covered under their X amount of years paint warranty by Audi in the same way the normal body...
Practicality beats all, homemade.
Phone mount. It’s the best location for me since it’s not hitting against my legs if attached to the garb handle like some Brodit designed I’ve seen, nor is mounted too far away by the air vents. It only covers volume control which I never use thanks to the...
Hi guys,
will a 8P0919283 be suitable for PDC retrofit on my 2006 A3.
The sensors on the bumper are the style in the photo, it is coming with the harness on the sensor side, so just need to make other harnesses without have good to buy Kufatec.
Thanks
Door puddle lights:
I’ve seen a few kits for £28 delivered including x4 harness, x4 white and x4 red led modules ready for fitting.
is anyone on here offering something which is competitive (UK)?
Thanks
Recently and quite suddenly my clutch felt heavy on a recent long drive and then a few days later it has felt reasonably lighter again in comparison.
Any thoughts what this could be?
How do I isolate the issue between master and slave clutch cylinders? I don’t have power bleeding tools.
Thanks
Has anyone ever here had to replace this bearing?
what type of symptoms are expected from this failing
I have some reason to believe this is part of an issue but cannot describe the issue well enough
Boost pipe quick remedy, just need a green gasket I think is : 3C0145117F
Desperation:
2mm Pilot hole and screw:
Angle grinder at a negative angle to prevent a chamfer which would allow it to pop off again:
Screws left long so it doesn’t just pop out and go into the engine...
Has anyone else been through the joys of the torx screw heads entirely snapping off rusted t30 mount screws on fan shroud to intercooler or intercooler to radiator.
How did you get it out of the plastic without damage.m, screw thread is below the surface.
Only idea I have is to melt the...
Hi all,
is there a way to log all VCDS blocks in one go? Then in future I can use the logs to help diagnose sensor problems on other cars by performing the same tests.
There is more than enough bandwidth to cover all blocks, each block typically shot 3-4 different items but many are duplicate...
...ideas.
In the mean time I've logged the Crank vs Cam engine speeds shown in VCDS - revving the engine stationary using VCDS
The green plot in an ideal world without taking into account any losses would be close to 0 as it is = Camshaft speed - (Camshaft speed*2)
Can anyone comment?
Thanks
Got an 06 A3, converted from single to double din, installed Rns Low Line (BNE 5.0 the mono coloured one) quad locks, fully wired in correctly and functions including the diversity antenna.
Correctly turn so on and off via CAN as expected, but battery is draining.
Any ideas what it could be...
As the tins says I'm looking for some help
2G MMI HIGH BOSE spec with oem Bluetooth. Need Aux is or hack Bluetooth to enable music stream.
Looking for pointers please
Hi
2.0TDI 170 : Engine code BMN
I have a vacuum guage and VCDS and was wondering if anyone has the turbo actuator set up proceedure.
The actuator has a linear potentiometer mounted on top which sends feedback to the ECM of the VNT position.
Many thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.